Product Introduction

Vibrating Table Method Relative Density Apparatus determines the relative density of cohesion-less, free-draining soils and provides well-defined results on soils that do not respond well to conventional moisture-density impact compaction testing. Soils for which this method is appropriate may contain up to 12 percent of soil particles passing a No. 200 (75µm) sieve, depending on the distribution of particle sizes, which causes them to have free-draining characteristics. Relative density of cohesionless soils uses vibratory compaction to obtain maximum density and pouring to obtain minimum density.

Standards: ASTM D4253

Main technical parameters

1. Voltage: 220V 50HZ

2. Vibration table: 762x762mm

3. Cylindrical mold: 0.500 cubic feet, φ 279.4 mm x 230.9 mm, thickness 9.5 mm.

4. Cylindrical mold: 0.100 cubic feet, φ 152.4 mm x 155.2 mm, thickness 9.5 mm.

5. Sleeve: φ279.4 mm, thickness 9.5 mm, length 203.2 mm.

6. Sleeve: φ152.4 mm, thickness 6.4 mm, length 305 mm.

7. Counterweight base plate: φ 276mm, thickness 12.7mm.

8. Counterweight base plate: φ1.51mm in diameter , thickness 12.7mm .

9. Weight block: 190 ± 2 pounds (86.2+0.9 kg), φ276 mm.

10. Weight block: 56.5 ± 0.5 pounds (25.6 ± 0.2 kg), φ 151mm.

Configuration List

1. Vibration table -1 unit

2. Controller -1 unit

3. Cylindrical mold: 279.4&152.4mm each

4. Sleeve: 279.4 and 152.4mm each

5. Counterweight base plate: 2 pieces

6. Weights: 2 pieces

7. Dial gauge device: 1 set